Tronxy X1 Fanmount/duct combodeal
Description
I Wanted To Better My Tronxy X1'S Hotend Fanduct And Add A Parts Cooling Fan. The Hotend Fan Is Now Directed At The Heatsink Only, So The Heater Block Itself Doesn'T Get Cooled As Much, This Results In A Shorter Warm Up Time And More Stable Hotend Temps. The Circular Fang Was Chosen To Cool From All The Sides, It Works Well. Printing With Minimal Clean-Up And Easy Instalation Was A Priority In Design. The Hardware You Need For The Hotend Fan: Nothing! The Stock Hardware Can Be Reused If You Choose To Run With The Stock Or Without A Fan Cover. If You Print One Like I Did, The 4 Fanbolts Need To Be Longer. The Hardware For The Parts Fan: 4 X M3X30 For 40X40X20 Fans Or M3X20 For 40X40X10 Fans 1 X M3X10 5 X M3 Hexnuts I Weighed The Total, The Stock Metal Part Weighs 80 Grams, The Pla Parts And Extra 40X40X20 Also Come In At Around 80 Grams. The Benchy Fan Shield: Thing:2763680 Sharing Thoughts, Results Or Any Feedback Is Very Appreciated!
Statistics
Likes
138
Downloads
0