Inside Diameter Print Check
Description
This Is Designed To Allow You To Check The Inside Diameters Of Holes. I Find Id'S The Most Troublesome Part Of 3D Printing. There Is An Axis Symbol Inscribed Into The Top Surface. Align This With The Positive X Axis And The Positive Y Axis So You Can Keep Track Of The Axes After You Remove It. The Hole Sizes Are 1.00", .075". 0.50", 0.25", 0.125", 0.0625, And 0.03125" This Is Designed With A Brim To Keep It From Lifting From The Build Plate. The Brim Does Not Interfere With Measuring, But I Usually Remove It Anyway. The Model Came In Sideways, So Rotate It And Lay It Flat On The Build Plate.
Statistics
Likes
1
Downloads
0