Grouped-Mando_Electro_Micro_Binoculars_ver1-Grouped

Description

This Thing Was Made With Tinkercad. Some People Have Had Issues Printing All The Parts At One Time So This Is A Grouped Version Of My Mando Bino Kit. There Are Three .Stl Files, The Main File Is The Body. There Is A File For The End Caps And A File For The Small Parts. This Model Is My Own Design For An Alternative Star Wars Electronic Binocular Kit. It Is Smaller Than The Normal Electronic Binocular Kit And Most Of The Greebles Are Static. When Constructed, This Model Is 119.67Mm Wide, 176.56Mm From Front To Back, And 69Mm Tall. The Front (Objective Lens) Is Designed So That You Can Add A Piece Of Acrylic Or Glass Before Glueing It In Place. The Ocular Lens Is Simply A Recessed Square Cutout So That You Can Add A Backlit Screen. The Inside Is Hollow Aside From A Center Support And The Front And Back End Caps Screw On So You Can Add A Battery And Simply Unscrew One End To Change Out The Battery. When I Constructed My Binos I Discovered That There Was A Fair Amount Of Sanding That Was Needed To Get All The Parts To Fit Together Properly. I Used Velcro Inside To Hold The Battery In Place. I Drilled Out A Hole On The Thumb-Rest On The Underside And Added A Push Button On/Off Switch To Illuminate The Ocular Lens Screen Leds And The Other Two Leds. I Added Two Leds One On The Front And One On The Top Knob. Feel Free To Tinker With The Model And Come Up With Your Own Ideas. Note- I Did Not Make Lanyard Loops On The Model; However, I Used Two Small D-Ring Picture Hangers At Each Screw Point On The Back Plate And Added A Leather Lanyard. Share, Print, And Tinker As You Wish And Enjoy.

Statistics

Category

Tags