Geeetech i3 GT2 Y Axis Mount
Description
This Is A Replacement For The Crappy Original Y Axis Mount Provided By Geeetech In Their I3C Kit And Probably Others As Well. The Hole Spacing Is 1 Cm And The Holes Are 2.75Mm Diameter So The Stock 3Mm Bolts Thread Into Them, No Nuts Required. The Gap For The Belt Is A Snug Fit @ 1.05 Mm, You May Need To Alter It If Your Printer Tolerances Aren'T Great, But It Should Work For Most I Think.
Statistics
Likes
6
Downloads
0