HUD Holder with Glass Mount
Description
Hello Again. This Time I Made A Hud Holder With Glass Mount Holder. Recently I Just Got A Van, And The Tires On It Are Oversized So It Throws Off My Speed By About 3-4 Mph. So I Purchased A Hud From Ebay Installed It And Worked Great. However Where Ever I Mounted The Hud In My Van The Reflective Image Would Either Be Twisted Or Double Imaged. So I Designed This Holder To Hold The Hud In One Place And Use Self Sticking 3M Stickers To Hold It In Place. The Hud I Purchased From Ebay Came With Its Own Transparent/Reflective Screen, Which Is Great But Where Ever I Placed It Didn'T Work. So I Designed The Holder To Hold A Piece Of Glass Which Is 1/16 Inch Or 2.3 Mm Thick Which Will Hold The Reflective Film In One Spot And Also Not Make The Image From The Hud Distorted. Https://Www.Ebay.Com/Itm/Q7-5-5-Car-Hud-Head-Up-Display-Gps-Speed-Warning-System-Fuel-Consumption-Au4/222621511239?Sspagename=Strk%3Amebidx%3Ait&_Trksid=P2057872.M2749.L2649 As You Can See In The Pictures It Work Out A Lot Better Then I Hoped. V1 Had A 2.5 Mm Track Which Worked Great, But If You Hit A Larger Bump Or Pot Hole It Fell Off Or Moved. Version 2 Has A 2.3 Mm Track Which Keeps The Glass Snug And Doesn'T Slide Or Pop Off. Version 2 Is Also A Little Narrower To Fit Exactly On Steering Colum And In Front Of Original Speedometer. Which Ever Version You Decide On Will Work, I'Ve Tried Both And Version 2 Works Better For My Needs. .
Statistics
Likes
9
Downloads
0