Phone holder for Focus or Leaf, Portrait or Landscape, easy to modify
Description
This Is A Flexible Freecad Design For A Phone Holder Which Fits Into An Air Vent And Holds Your Phone Either Portrait Or Landscape Without Any Adjustment. The Parts Here Are For A Oneplus 2 Phone But Work With Most Larger Smartphones. The Part Which Varies From Car To Car Is The Lower Clip And I'Ve Included One For A Ford Focus And One For A Nissan Leaf. The Freecad File Is Easy To Modify To Get The Dimensions For Your Particular Phone And/Or Car Vent. The Upper Clip Only Has To Be Moved In The Z Axis To Fit The Portrait Width Of Your Phone. The Lower Clip Needs Adjusting To Your Particular Air Vent Design And The Length Of The Long Part Of The Clip Adjusted To Fit The Phone'S Landscape Height Up To The Upper Clip. The Separation Between The Lower Clips Is: A Snug Fit In The Air Vent, But Not So Far Apart The Phone Falls Through(!) There'S No Need To Be Very Accurate On The Dimensions, For Example These Work Fine For A Nexus 5X, Just With A Bit More Wiggle Room. Have Fun!
Statistics
Likes
35
Downloads
0