Wearable Royal Crown
Description
I Made This For A Co-Worker Friend Who Wanted A Wearable Crown. It Came Out Pretty Nice, So I May As Well Share. Print Instructions: 1. Slice 2. Print :) * If You Want Different Color Balls (As In My Picture) Then Change The Filament Color After About 80-81 Percent Of The Print. ** For Kids Sizing - Use About 84 To 88% Scale To Shrink It Down A Bit. Also, If Your Printer Is Limited To 200X200 Use 93 Or Less Scaling To Fit.
Statistics
Likes
49
Downloads
0