Customizable Brushless Motor Soft Mount
Description
**Note** - If You Are Getting Errors In Customizer, I Apologize And Recommend That You Download The .Scad File And Run It Yourself In Openscad. I Think It Is An Error On The Server Side Because I'M Seeing It With Other Customizable Objects As Well. ## Introduction This Is An Openscad Generator For Printed Tpu/Tpe Brushless Motor Softmounts Like Those Commonly Used In Fpv Racing Quadcopters. To Get The Most Vibration Isolation, You Need Two For Each Motor. One Between The Screw Head And The Frame, And Another Between The Motor And The Frame. Also You Want To Ensure That The Screw Moves Freely In The Frame. If The Hole Is Too Tight, You Will Not Get The Benefit Of The Motor Floating On These Mounts. ## Presets I'Ve Included Stl Files For 1104-6 Motors And 2204-6 Motors That I'Ve Printed And Used. Here Are The Parameters I Used If You Want To Tweak Anything. If You Have Any Other Common Motor Setups, Post Them In A Comment And I Can See About Adding Them Here. (Or If You Know How To Do Presets In Customizer, Let Me Know.) ### 11Xx Motors (E.G. 1102, 1103, 1104, 1106, Etc.) *9Mm Mounting Pattern* * Center_Hole_Diameter = 4; * Screw_Hole_Diameter = 2.25; * Mounting_Pattern_Diameter_1 = 9.0; * Mounting_Pattern_Diameter_2 = 9.0; * Screw_Head_Diameter = 4.25; ###22Xx Motors (E.G. 2204, 2206, 2207, Etc.) *16X19Mm Mounting Pattern* * Center_Hole_Diameter = 7; * Screw_Hole_Diameter = 3.15; * Mounting_Pattern_Diameter_1 = 16.0; * Mounting_Pattern_Diameter_2 = 19.0; * Screw_Head_Diameter = 5.75;
Statistics
Likes
47
Downloads
0