Trinus PCB Fan Shroud
Description
This Design Is Used To Mount A Fan To Blow Over The Kodama Trinus Main Pcb To Keep The Stepper Drivers Cooler. It Slots On The Top Right Of The Board And Is Easily Removed. The Current Design Doesn'T Allow The Use Of The Sd Card Or Laser. It'S Not Really Needed When Using The Laser Though. It Mounts A 40Mm X 40Mm X 10Mm Fan. All The Connectors On The Bottom Of The Pcb Act As A Baffle To Ensure Air Flows Over The Key Parts Of The Board. This Is The Fan I'Ve Used In My Design: Https://Www.Jaycar.Com.Au/40Mm-12V-Dc-Thin-Fan/P/Yx2503 There Are Tabs To Keep The Fan In Without Permanent Fixings However I Did Have To File One Edge Of The Fan As The Fit Is Very Tight.
Statistics
Likes
4
Downloads
0