Tevo Little Monster E3D V6 effector in openscad
Description
This Is My Attempt At Creating An E3D V6 Effector For The Tevo Little Monster In Openscad. I Purchased An Original And Knowing Its Smaller Than The Clone Volcano That Comes With The Tlm So I Created This One. I'Ve Printed It In Abs And Its Very Solid. It Uses Thru Holes So No Threads Are Needed But Nuts Are. Note: I'Ve Test Fitted This Effector With Both E3D V6 And E3D Volcano Hot-Ends And Both Will Work On My Effector Design. You Will Need Longer Standoffs For The Bltouch On The Volcano (22Mm Versus 12Mm On The V6) Note: If You Have Trouble With The J-Head Fitting Into The Cutout, Increase $Fn. 116 Takes A While To Render But Fits Great. 28 For The Value May Require Some Filing On The Center Hole To Fit. <B>Update 2/52018: Adjusted Inner Ring For J-Head And Bltouch Screws</B> <B> Update 2/3/2018: Fixed Bltouch Bolt Spacing, Added Nut And Bolt Info To Scad File</B> <B> Updated 1/28/2018: E3D V6 Is Done, Only Question Is Metal Fan Shroud Mount Holes </B> <B> Update 1/27/2018: Changed To Thru Holes And A Clip Design</B>
Statistics
Likes
22
Downloads
0