Raspberry Pi Test Stand
Description
I Designed This Project To Be A Modular Workbench For The Raspberry Pi 3. I Suggest You Start By Printing Just The Base And The Feet And Have A Nice Work Stand For Your Pi. One Of The Cool Features Of The Pi Is The Programmable Io Pins. In The Backbone, The Next Section, I Designed A Pocket For A Standard 82 X 55 Mm, 400 Point Breadboard, Giving You A Convenient Place To Interface. Going Further, The Next Section Is The Top Plate. This Offers Support For The Raspberry Pi Camera With Pan And Tilt Servos, And A 7 Inch Lcd Hdmi Display. The Display Is The Current China Flavor 7 Inch Lcd Display For The Raspberry Pi. Not A Touch Screen. This One Is From Ebay For Under 30 Usd. It Has A Nice Driver Board With Both Hdmi And Vga Inputs. If You Want Just A Stand Alone Display Stand; Check Here.. Https://Www.Thingiverse.Com/Thing:2777490 The Servos Used Here Are Considered Medium Size (Hs-422). Servos Come In Many Sizes. If You Have Other Servos And Want Pan And Tilt, Then Please By All Means, Start A New Design. I Hope All You Pi Fans Fine This Project As Useful And Fun As I Have..
Statistics
Likes
12
Downloads
0