Shorting block for RC airplane
Description
This Block Holds Double Pins, 9 Pins Long. As You Can See In The Pictures, I Soldered The Pins Into Rails, And Can Distribute Power To My Servos Or Cameras Or Anything That Needs Either 5V Or Battery Voltage. I Then Mix Up Some 2 Part Epoxy And Cement The Pins Into The Block And Glue The Block Into The Airplane. I Uploaded 2 Models, The Vcc One, (Shortingblock12.Stl ) Is A Few Mm Wider Then The 5V One. Hope This Helps Someone, My Airplane Will Have 2 Of Them, One Of Each. I Made Them As 2 Separate Models So As Not To Get Them Mixed Up And Let Out The Magic Smoke. Printed In Hatchbox Blue Abs, At .15Mm Layers. I Had Need Of A Block Like This For Another Project, This One Is In A Box, I Added Screw Holes And Added A Protective Box Around The Outside To Keep The Pins From Easily Being Shorted Out By A Stray Wire. This One Is Named Shorting Box New.
Statistics
Likes
1
Downloads
0