Pozyx UWB | Tag Casing & Anchor Pedestal
Description
This Thing Consists Of Everything Needed To Setup A Pozyx Uwb Testbed Without Any Great Effort. A Tag Is Supposed Not To Be Used In Conjunction With An Arduino, But Most Likely Connected To A Computer Via Serial Port. The Casing For Tags Provides Protection While Doing Localization Experiments. Anchors Are Assumed To Be Fixed Most Of The Time, Therefore The - Somewhat Geometric - Frame Is Kept Together With Cable Ties Making It Highly Convertible For Different Places Of Installation. For One Casing You Need: - 2X Tag-Side - 2X Tag-Conn - 2X Tag-Pin - 4X 2.5 Mm Screws For One Frame Placing An Anchor Upright - As Shown In The Image - You Need: - 1X Anchor-O - 2X Anchor-T - 2X Anchor-X - 6X Cable Ties
Statistics
Likes
2
Downloads
0