Nikon SB-800 Flash Softbox
Description
I Wanted A Small Softbox For My Nikon Sb-800 Flash That Is Still Small Enough To Carry It Around. The Main Part Slides Over The Flash Head And Has Also Has A Hole For A M3 Screw And Nut To Clamp It Down If It Sits To Loose (Works Great For Me Without That). For The Inside I Used Aluminum Foil As Reflector (One Side Of The Foil Is A Bit More Dull, I Used That Side). I Also Uploaded A Pdf With A Printout Template For The Reflector (But Leave One Side A Bit Longer So The 2 Ends Overlap). I Glued The Foil To The Paper Cut It Out An Then Glued Everything Inside The Box. As A Diffuser I Use A Tissue And It Works Great But Maybe I Am Going To Replace Them With A Piece Of Cloth Or Photo Gel. To Provide A Better Fit And Easier Switching Of The Grids I Sticked A Piece Of Foam Rubber Where The Grid Goes In. Sits A Bit Tight Like That But It Won'T Fall Out. <B>Update:</B> Added <B>4</B> Different Grids For Now, <B>One With 60°</B>, One With 46°, One Big Grid Just For Softbox Use Without Directing The Light And The Frame Only. Maybe I Am Going To Buy A Yongnuo 560 (Since Its Quite Popular For Cheap Flashes) And Make Another Version For It.
Statistics
Likes
140
Downloads
0