Atari SIO plug with FTDI PCB
Description
I Made Small Modification To <A Href="Https://Www.Thingiverse.Com/Thing:1831769">Atari Sio Plug</A> In Order To Fit In The Ft232Rl Usb To Serial Board From <A Href="Https://Www.Ebay.Com/Itm/310510484589">Ebay</A>. The Board Dimensions Are 26X16Mm Without Pin Header. In The Atari Plug I Used 3.96Mm Pitch Contacts (For <A Href="Https://Www.Gme.Sk/Kontakt-Pff04-01Ft">Example</A>). To Wire The Pcb You Must First Desolder The Pin Header And Solder Jumper To 5V On The Bottom Side Of The Pcb. Then Connect: Sio 3 (Data In) -> Txd (Through Schottky Diode Atari --|>I-- Txd) Sio 4 (Ground) -> Gnd Sio 5 (Data Out) -> Rxd Sio 7 (Cmd) -> Cts The Diode Can Be Omitted If You Won'T Use The Adapter In Sio Daisy-Chain. You May Want To Use The Transparent Filament In Order To See The Rx/Tx Activity Diodes On The Pcb.
Statistics
Likes
11
Downloads
0