15 to 12 mm thru-axle skewer insert
Description
Endplugs For Stepping From 15 To 12 Mm Thru-Axle Skewers. Not Recommended For 3D Printing. Turn It On A Lathe. Drawing In Inch & Mm. I Listed The Closest American/Imperial Drills For The 12 Mm Bore. I Then Used A Boring Bar To Turn The Id To Exactly 12 Mm. In Practice, The 15/32" Drill Bit Worked Wonderfully To Start The Hole. If You Are Fancy, You Can Add O-Rings Like This (Https://Www.Ebay.Com/Itm/J-L-15Mm-12Mm-Thru-Axle-Hub-Conversion-Adapter-For-Hope-Mavic-Dt-Swiss-Shimano/201740754770?_Trkparms=Aid%3D222007%26Algo%3Dsim.Mbe%26Ao%3D1%26Asc%3D20140131123730%26Meid%3D16Dcab470E5344Fcb2190F7D817F83B8%26Pid%3D100167%26Rk%3D5%26Rkt%3D15%26Mehot%3Dlo%26Sd%3D272908309994&_Trksid=P5411.C100167.M2940) To Have Some Measure Of Retention In The Hub. In Practice, With My Shutter Precision/Exposure Pd-8X Hub, The Fit Was Loose, So I Could Definitely See These Getting Lost If You'Re Changing A Flat On The Side Of A Road, If You Don'T Have O-Rings.
Statistics
Likes
9
Downloads
0