Positioning Jig for Gardco Buchholz Indendation Tester BH2000
Description
This Is A Positioning Jig For The Gardco: Buchholz Indentation Tester Bh2000. Https://Www.Gardco.Com/Pages/Hardness/Buchholz_Bh2000.Cfm In My Experience, Using The Provided Marking Template Was Problematic And Lead To A High Variability In Data. This Jig, When Printed At 100% Will Not Interfere With The Force Placed On The Test Surface By The Indentor And Will Place The Provided Microscope Approximately 0.5 Mm Above Or Below The Scale For Easy Reading. To Use This Jig Reliably I Would Suggest Using Masking Tape Around The Edges To Keep The Jig From Moving Or Possibly Double Sided Tape On The Underside. Good Luck, Produce Good Data!
Statistics
Likes
0
Downloads
0