Endstop Switch Bracket for SK10 Shaft Support
Description
Universal Endstop Limit Switch Bracket For Sk10 Shaft Support. Requires Two M2.5X12 Screws And Two M2.5 Nuts To Mount A Switch. Can Be Used For Both Left And Right Switch Mounting. ### Installation Mount Limit Switch Onto The Holder Using Two M2.5X12 Screws And Two M2.5 Nuts. Loosen Tightening Screw On Sk10 Bracket And Remove Shaft. Slide The Holder Onto The Bracket And Insert Shaft Back Through Large Hole In The Holder. Using Side Hole On The Holder, Adjust Tightening Screw To Secure The Shaft In The Bracket. ### Parts [Limit Switch](Https://Www.Aliexpress.Com/Item/Sanjiuprinter-3D-Printer-Parts-Mini-Kossel-Reprap-Endstop-3-Feet-1-Meter-Long-Limit-Switch-4Pcs/32805250863.Html)
Statistics
Likes
13
Downloads
0