Micro Brushed FPV Quadcopter 115mm
Description
The Source File Is Included. Open With Freecad. This Is A Micro Quadcopter Frame I Designed For Fpv. It Is 115Mm Diagonal And Is Made For 8.5Mm Brushed Motors. Use Tape And/Or Rubberbands To Hold Your Fc And Other Items. This Is A Pretty Generic Frame And Is Made For 65Mm Props. The Front Motors Have Enough Gap To Allow For A Standard Camera+Transmitter Module With Mushroom Antenna. I Am Using An 800Mah 25C Battery W/ 5-10 Minute Flight Time. It Is A Bit On The Overweight Side At 74G W/ Battery. Max Thrust Should Be Around 100-115G I Believe According To A Youtube Prop Test. I Would Recommend 400-600Mah Batteries. The Body Is Designed To Hold A Standard 30X30 Brushless Fc And Converted To Brushed Using These Items From Banggood: Brushed Motor Controller Https://Www.Banggood.Com/Micro-Brushless-Motor-Driver-For-Naze32-Spracing-F3-Flight-Controller-P-1079832.Html?Rmmds=Myorder&Cur_Warehouse=Cn 3.7V -> 5V Voltage Regulator Https://Www.Banggood.Com/Dc-Dc-3_7V-To-5V-Step-Up-Voltage-Booster-Regulator-Micro-Power-Module-For-Brushed-Racing-Quadcopter-P-1092602.Html?Rmmds=Myorder&Cur_Warehouse=Cn Flysky Micro Ppm Receiver 6Ch (Compatible With Turnigy 9X V2) Https://Www.Banggood.Com/Compatible-Flysky-Pro-Micro-2_4G-6Ch-Ppm-Receiver-For-Afhds-Transmitter-P-1151475.Html?Rmmds=Myorder&Cur_Warehouse=Cn
Statistics
Likes
6
Downloads
0