Prusa MK2/MK2S/MK2.5S ext. driver board box
Description
This Box Is Designed To Fit My External Driver Board For The Original Prusa Mk2/Mk2S/Mk2.5S Printers. It'S Is An External Stepper Driver Board For X And Y Stepper Motors Of The Original Prusa Mk2/Mk2S/Mk2.5S Printers. It Allows Usage Of Tmc2100 (Silent Step Stick And Similar) Drivers, So Your Printer Will Become A Lot Quieter And Much Smoother Due To The 256 Step Interpolation (Same As On The Mk3). Update!! 28.04.2018 I Made 6Mm Shorter Version Of The Box, Because It Turned Out I Used Custom Front And Rear Brackets For The Y Axis And They Are Taller Than The Original Ones. So If You'Re Still Using Original Mk2S Parts Use The Shorter Version Of The Box! More Information About The Board Here: Https://Vmod.Space/Product/Prusa-Mk2S-Ext-Driver-Board-Rev2-3/ Https://Vmod.Wordpress.Com/Prusa-Mk2S-Ext-Driver-Board/ You Will Need Some Supports To Print The Box. I'Ve Included Versions Without The Voltmeter And Without The Noctua Fan. Noctua Fan Should Be 40X40X10, 12V.
Statistics
Likes
35
Downloads
0