GEPRC GEP-RX5 Hawk Canopy (Pod)

Description

This Is An "Experimental" Pod For The Geprc Gep-Rx5 Hawk Frame. I'Ve Designed It For Specific Configuration: Racerstar Rs33Ls 33A 4 In 1 Esc; Omnibus F4 Pro Flight Controller; Turnigy Ia6C Receiver; Ft48X Vtx With Angle Pigtail; Runcam Split With Rc25G Long Lens; Hobbywing Xrotor 2405 Motors; Geprc 5040 V2 5 Inch Props. It Was Pretty Challenging To Assemble All Components In This Pod. I Haven'T Yet Solved The Problem Of Easy Access To The Usb Port Of Fc And Split'S Plate. I'Ve Soldered Angle Micro Usb Cable With Thin Silicon Wires. With This Cable, I Can Connect To The Board Through The Air Intake Openings. Anyway, I Recommend To Configure Fc And Other Components Before Assembling. The Pod Looks Interesting In My Opinion, Although Not Very Practical. I'M Thinking, How To Improve This Pod, And Ready To Hear Any Ideas. Camera Should Be Mounted Through Standard Metal Mounting Bracket. Supports Designed For Printing With 0,3 Mm Nozzle.

Statistics

Category

Tags