Bar-End Plugs
Description
Quality Plugs With Effective Grip. You Will Never Lose Your Plugs Again And Will Protect Your Bar In Case Of A Crash. With This Specific Design The Plug Is Very Strong And If You Over-Tighten It, You Will Not Destroy The Plug But Only The Wedge (In Contrast With The Usual Wedge Design). There Are Two Sizes: One With Large (32Mm)Outer Diameter If You Are Using Lock-On Grips (The Cap Will Also Protect The Rings) And One With Small (28Mm) Outer Diameter For Simple Grips.There Is A Version With My Name Embossed And One Without, In Each Diameter. Except For The Printed Parts You Will Need A Pair Of M5 Bolts (25Mm). There Are Two Versions Of The Wedge: One With Threads, That Has To Be Printed Verticaly And One Without Threads That Can Be Printed Horizontaly. The Threadless Version Printed Horizontaly Is Stronger But You Must Use A M5 Tap To Create The Threads. Before You Insert The Plug Into The Bars, Tighten The Wedge A Bit, So The Plug Fits Snugly In The Bar. That Way The Wedge Will Not Rotate.Then Tighten The Bolt (Do Not Use Excessive Force).
Statistics
Likes
151
Downloads
0