Interchangeable FPV Pan/Tilt Camera Mount for RC Models
Description
Howdy, Are You Looking For An Interchangeable Pan Or Pan & Tilt System For Fpv, With Platforms For A Mobius Or Runcam 2 Hd Camera? The Pan Axis Will Accept A Standard 9G Or 12G Servo Or Ideally A 180 Degree Servo Such As The Turnigy Tgy-180D. As For The Tilt, A Decent Metal Geared Servo Is Suggested. Update: There Are Two Extra Files Which Include Pre-Made Supports For Your Ease Of Printing & A Video Of Them Is Here Https://Www.Youtube.Com/Watch?V=Abxvgxuacas **Built Tips: ** - Parts Are Best Printed In Tougher Materials Such As Abs Or Carbon Laced Filament. - Drilling The Holes Out With A 3.0Mm Drill Makes For A Smoother Tilt Action. - M3 Plastic Or Metal Bolts & Nuts (14Mm Or Longer) Are Needed To Secure The Tilt Platform. - Work On Getting The Pan Dome To Slide As **Close As Possible To The Base** (Almost A Friction Fit), So The Pan/Tilt Part Does Not Rock. This Will Save Excessive Stress Being Put Onto You Pan Servo When Landing - Printing An Extra Base And Making A "Sandwich Of Foam" Is A Great Way Of Providing A Secure Way Of Holding The Top Pan/Tilt System In Place And Through Thinner Layers Of Foam Created By Andrew Boulton, His Youtube Channel Is Here Https://Www.Youtube.Com/Channel/Uclv1Vkedidwzac0Uavg2Yrq Check The License For These Parts, Attribution Is Required And No Commercial Deviations.
Statistics
Likes
69
Downloads
0