Nerf Retaliator 25N spring spacer
Description
This Is A Spring Spacer/Spring Rest For The Worker Prophecy "25N Spring" For Retaliators, Retalicons, And Reconciliators. I Would Only Recommend This With Expanded Plunger Tubes So The Extra Volume Can Be Utilized Effectively. It Fits Inside The Retaliator/Recon Stock Attachment Point. For Retaliator Shells, The Original Spring Rest Will Have To Be Dremeled Away Entirely So The Spring Can Rest On This Part. This Part Has The Spring Under A Sizeable Amount Of Precompression And The Springload Is Held By The Screws Holding The Stock Attachment Block On. I Replaced The Stock Ones With Longer Screws And It'S Holding Fine. Alternatively/Additionally, You Can Put Screws Through The Stock/Stock Block Diagonally Like The Prophecy Blaster Itself. You Essentially Need A Metal Boltseld/Really Rigid Boltsled For This To Work. Tolerances May Vary, This Is What My Printer Was Able To Make. The Part Should Fit Pretty Snugly Inside The Stock Attachment Block And The Spring Should Not Rub (Much) On The Inside.
Statistics
Likes
24
Downloads
0