the WhoovShip
Description
Another Take On A Tiny Whoov You Can Use The F1 ,F2 & V1 Parts On Eachother But For The F1 Hull , You Will Need To Use The F1Orf2 Deck I Always Just Use 2 Strips Of Tape On The Sides To Keep It Shut You Wil Need To Cut An E010 Frame'S Ducts ,To Fit In The Deck They Should Fit Nice And Snug I Add A "Foam Template" I Used This To Mark Of Where To Cut Ma Foam I Noticed , That The Ducts Of The E010 Are A Slight Bit Thicker Then The E010S And E011 I Made All Mine With The E010 Ducts In Mind , So You Might Need A Drop Of Hotglue To Use The E010S & E011 Ducts In The Deck Part That Sed , Only Use The E011 Duct In The F1 Deck As It'S A Single Lift Motor On That Deck Would Save Them E011 Ducts/Motors For Propulsion ;-) For The Motormounts , I Scale It Up 1% In The Slicer Make'S It A Bit Easyer To Get Them On
Statistics
Likes
71
Downloads
0