Tiny Whoop Hovercraft + Racing Edition V2
Description
- Tiny Whoop Hovercraft Racing Edition - Print With Supports On Build Plate - Made For 6.5Mm Motors And Almost Any Battery - To Hold Battery In Place Put Rubber Band ( Loomband )Over Stand For Main Board, It Will Press On Battery - Adjust Height Of Bottom Just By Resizing Z Dimension In Slicer (Make It 9Mm Or More !) - You Will Need 3X M2 Screws (Can'T Be Longer Than Your Bottom Height + 1.7Mm)
Statistics
Likes
135
Downloads
0