Trinus Pi Camera Mount
Description
This Is A Raspberry Pi Camera (V2) Mount For The Kodama Trinus. It Works By Clipping In To The Frame. It'S Not Adjustable As I Wanted To Be Able To Have It As Far From The Build Plate As Possible. The Adjustable Ones Are Too Close. The Camera Slots In From Above And The Cable Enters From Below. 9Feb18 - I'Ve Added A Second Stl File. This One Has A Shade Down The Left Hand Side To Stop Lens Flare If You Have Lighting On The Frame Uprights. The Shade Is Not Visible In The Image.
Statistics
Likes
5
Downloads
0