Pergo Samsung Fridge Leftover Drawer Repair RFG297AARS
Description
Samsung Model Rfg297Aars Or Like The Right Side Knob Broke Off Of Our Bottom Drawer. Here Is A Fix For It. I Recommend That You Use Abs Plastic To Get A Tight Pressure Fit. For That Reason I Made The Model A Tad Big And You Just Need To Dremel The Rounded Arc In A Tad With A Flat Round Wood Bit. Abs Is Machine Workable, Pla Is Not. I Promise It'S Only 30 Seconds Of Work To Get That Tight Fit. I Did Make A Location Where You Could Place A Screw, But I Later Found It'S Not Needed Because Of The Nice Fit. Print With .4 Mm Nozzle And Use At Least 5 Shells / Outer Layers This Will Give You Enough Margin For The Grinding. Only Locations I Had To Do This With Were The Arc And The Location Behind The Knob. You Need To Grind The Samsung Part Flat So The Knob Is Completely Gone. This Makes Perfect Sense When You See The Fit. (See Pictures). This Is Not A Cheesy Fix, It Is Sturdy And Permanent Fix That Looks Good. :)
Statistics
Likes
4
Downloads
0