Mount block for 4 Nimbles V1 on a Kraken
Description
The Mount Block Allows You To Bolt 4 Nimbles On A E3D-Kraken Hot End. This Is Experimental, Mainly Because It Needs A Ptfe Tube That Curves Into The Kraken. This Is Done To Leave The Middle Available For The Water Cooling And To Still Be Able To Open The Nimble Breeches. I Have Tried A Curved Ptfe Tube On A Small Test Block And Had No Trouble Printing But Ymmv. Have Not Tested It To The Fullest Extent I Normally Do. Therefore, Wip. Edit 1: Corrected An Error In Positioning The Ptfe Tubes. Also Added A Little Cut Out For The Nimble Legs. And Added Then Iges File. The Stl Models Are Checked And Optimised. The Parts That Need A Different Orientation To Print Properly Are Rotated To The Preferred Printing Position. #### The Nimble Extruder With An Installed Weight Of Less Than 27 Grams On Your Carriage/Effector The Zesty Nimble Is The Smallest And Lightest Extruder You Can Buy, It Has Ample Torque And Can Be Mounted In Multiple Orientations. The Nimble Is Available From [Zesty Technology.](Https://Zesty.Tech)
Statistics
Likes
8
Downloads
0