MyRCCar Steering System for three different bearings: 5x8x4, 5x10x4 and 6x12x4
Description
This Is A Simple Steering System Without Servo Saver By Now... It'S Obviously Designed To By Used With [Myrccar Universal Chassis](Https://Www.Thingiverse.Com/Thing:2784912) And [Myrccar F/R Diff Housing](Https://Www.Thingiverse.Com/Thing:2785816). I Have Designed 3 Versions For 3 Diferent Bearing Sizes: 5X8X4, 5X10X4 And 6X12X4. If You Plan To Build The Whole Car You Will Need Many 5X10X4 Bearings So I Recommend You To Choose The Design Appropriated For Them. As You Can See There Are No Links To The Steering Blocks Or Servo Arm. This Parts Should Be Adjustable So I Plan To Use Links Other People Made Or Create My Own If They Don'T Fit My Needs. So 5 Parts This Time To Print. Two Pivots, Both Towers And The Plate. With This Set And Some Adjusting To The Links You Will Be Able To Set The Steering To Your Needs. I Also Plan To Make A Little Different Tower Arms In The Future If Someone Suggests It'S Needed. One More Time, If You Have Some Questions About This Thing Please Leave A Comment. If Your Question Would Be Related More To The Whole Proyect Please Join The [Myrccar Group](Https://Www.Thingiverse.Com/Groups/Myrccar). I Hope I See You There Soon Building Your Own Rc Car:)
Statistics
Likes
53
Downloads
0