RC laser dinghy sail boat
Description
This Is A Almost Fully Printable Rc Sailing Boat . The Model Is Laser Dinghy 1:10 Scale From Real Boat. Total Of 460 Mm Long You Will Also Need: 1 X Flysky Fs-Gr3E 3 Channel 2.4G Receiver & Transmitter 1 Meter Aluminum Tube Diameter 10 Mm.(The Total Length Of The Mast Is 710 Mm And The Boom Is 290 Mm) 1 X Sg9 Servo Motor 1 X 360 Degree Continuous Rotation Rc Servo 2 X 10Mm/0.39 Inch Spring Clip 1 X Push Button 8X8 Mm 1 X Rectangle Plastic 4 X 1.5V Aaa Battery Holder 1 X Waterproof Ripstop Nylon Fabric 1 X Lead Weight Of About 400-500 G Update 12/05/18: Added Video Of First Water Test Https://Www.Youtube.Com/Watch?V=Byqvepyxuh4 The Bow Is Slightly Diving In Reach And It Has Some Difficulty To Jibe, I Added The Short Keel With 5 Deg Back To Move The Weight Back A Little. Also Added A Hydrofoil For Keel And Rudder And I Cant Wait To Test It Again.. Https://Www.Thingiverse.Com/Thing:2907306 Now I Need To Solve The Balancing Problem.. Update 17/05/18: Added Some Pictures Of The Keel And Rudder. For The Rudder Pin I Used M4X30 Stainless Steel Bolt Screwed To The Rudder Holder From Bellow , I Put A 6Mm Od, 4Mm Id Stainless Steel Tube In The Rudder For Free Movment. For The Keel I Used A 400 Grams Lead Fishing Weight That I Drilled In It To Fix It With A M4 Screw That Goes To M4 Nut That I Put In The Keel Top.
Statistics
Likes
617
Downloads
0