Bioshock Diorama Base
Description
This Diorama Now Includes Separate Stls For The Floor And Door. It Is Designed To Work With A Big Daddy And Little Sister From Cgtrader Printed At 500%. The Base Incorporates Creaton13'S Bioshock Nameplate And A Scaled Down Splicer Mask From Audrey2. Thanks! Both Models Are Designed To Be Printed On A Cr-10 Or Other Large Format Printer, But It Should Scale Down As Needed. I Have Printed Both Successfully Without Supports With 0.1Mm Layer Height For The Base And 0.2Mm Layers For The Door. Both Should Be Printed At Around 20% Infill. For Some Reason, Part Of The Door Sits Off The Bed. I Recommend Dropping That Model A Few Tenths Of A Mm Down To Avoid Supports. Feedback Appreciated, But I Consider This Done For My Purposes. I Hope They'Re Helpful If You'Re Working On A Bioshock Diorama!
Statistics
Likes
105
Downloads
0