Precision-Piezo Probe with 3 Piezo 15mm
Description
Without Groovemount, The Probe From Precision-Piezo Is Harder To Use. And Drilling The Piezo Is A "Not Optimal" Operation. So I Tried To Use 3 Smaller Piezo Disks Instead Of One Bigger That Is Drilled. The Piezo Needs To Be Isolated From The Heatsink. A Little Bit Of Kapton Is Nice. The 3 Piezo Are Sensitive Enough In Compression. Needs To Be Printed With A Layer Height Of 0.1 Or 0.05 (If Bigger, You'Ll Lose The Piezo Marks) You Just Have To Slide The Part Between The Heatsink And The Effector (Or Your Mount)
Statistics
Likes
12
Downloads
0