Simplified E3D V6 compatible X carriage for 3Dtje Mini 3D Printer- Remixed with endstop support
Description
As I Don'T Own Stepper Drivers That Are Fancy Enough To Run Without Endstops, I'Ve Modified Part Of Fiveseven808'S Improved 3Dtje X Carriage To Incorporate A X-Carriage Screw (Specifically An M3X20) Provision, Thus (Hopefully) Allowing An X-Axis Endstop To Be Used (The Positioning Of The Screw Is Based On That On The Original 3Dtje Design, Albeit Only Roughly). The New Part Works With The Original "Hotend_V2_Cut_Standalone.Stl" Provided In Fiveseven808'S Design, And Replaces The Second Half Of The Hotend Mount Provided In The "Hotend_V2_Cut.Stl" File Please Note That While The Mount Has Been Tested With A E3D V6 Hotend For Fit (As Pictured), And Successfully At That (It'S Not A Perfect Fit, But Neither Was The Original Design) This Has Not Been Tested On An Actual 3Dtje Yet, As Mine'S Only Half-Finished. Thus While It Will Probably Work, I Can'T Be Certain Just Yet. I Have Also Included The Freecad File Used To Design It If Anybody Wishes To Improve On The Existing Design.
Statistics
Likes
10
Downloads
0