Carboy Drying Stand
Description
Simple Perforated Cylindrical Stand That Allows A Carboy To Be Set On It Inverted, Without The Top Of The Carboy Touching The Floor/Sink. The Perforations Are Intended To Allow Drying. It Is Intended To Be Printed Upside Down, That Way There Are No Overhangs Greater Than 45°. I Used Abs, With A 20% Infill, And It Seems Sturdier Than Necessary. Here'S A Timelapse Video Of The Printing: Https://Youtu.Be/P-Xx8Uj7Xjc
Statistics
Likes
19
Downloads
0