Tronxy X5S MGN12H Corner Mount
Description
These Corner Brackets Go With My Other Mgn12H Pieces In A Quest To Convert My Tronxy X6S To Linear Rail Configuration. X Bracket: Https://Www.Thingiverse.Com/Thing:2787550 Mirror The Part Along The Short Face To Print One Of Each Side. Nyloc Nuts Fit Into The Recesses So You Don'T Have To Crush Cheap Bearings In Cheap Idlers. The Tall Mount Is Recessed For Under-Side Mounting. The Recessed Nylocs Should Have The Small Part Facing Upwards To Mate Against The Idler Without Rubbing The Pulley Part Itself. M5 Hardware. Mount The Spacer Under The Hexagonal Recess So That There Is Enough Material For Good Compression Strength. The Piece Should Abut The Extrusion If My Envelope-Math Is Good (Fingers Crossed!) Edit: 2-10-18. Tried To Credit Someone For Design Idea By Posting A Remix. Did Not Go Well. I Have Removed My Y-Brackets. Those Will Be A Private Project People Can Request From Me Directly As They Need. Edit: 2-15-18: Fixed M5 Nut Recess Sizes. Printed One Of The Old Files And All Looked Good Except The Nuts.
Statistics
Likes
5
Downloads
0