Based on Diatone 160mm Quad 4" prop
Description
Hi, Take A Look At My Other Designs Https://Www.Thingiverse.Com/Builtbrokenglued/Designs *2018* Added Is A Top Mount For This Design. The Top Plate Is 2.5Mm Thick. Change This In Your Slicer To The Thickness You Require. *I No Longer Have The Original Tinkercad Design Due Making A Detachable Arm Type. The Detachable Arm Type Was Quite Weak Around The Joins And I Haven'T Gone Any Further..* I Designed This While I Wait For A New Diatone Grasshopper Frame To Arrive From China. I Have Not Printed It As Yet. It Will Be Updated With Pictures And Weight First, Then A Test Of The Frame Itself Once I Have Designed The Top Plate. My Setup Which Is The Basis Of The Design. 1806 Brushless With 4" Props (30.5 X 30.5 Stack) Racerstar 4 In 1 Esc Https://Www.Banggood.Com/Anniversary-Special-Edition-Racerstar-Rev35-35A-Blheli_S-3-6S-4-In-1-Esc-Built-In-Current-Sensor-P-1180734.Html?Rmmds=Myorder&Cur_Warehouse=Usa Cc3D With Angled Pins Https://Www.Banggood.Com/New-Version-Openpilot-Cc3D-Evo-Flight-Controller-Stm32-32-Bit-Flexiport-P-973582.Html?Rmmds=Search Flysky X6B Receiver Https://Www.Banggood.Com/Flysky-X6B-2_4G-6Ch-I-Bus-Ppm-Pwm-Receiver-For-Afhds-I6S-I6-I6X-Transmitter-P-1101513.Html?Rmmds=Search&Cur_Warehouse=Cn Diatone Grasshopper 5V Distribution Board. Eachine Led Motor Mounts Https://Www.Banggood.Com/Eachine-Wizard-X220-Spare-Part-Led-X25V-Motor-Mount-For-1806-2206-Motor-P-1102067.Html?Rmmds=Myorder&Cur_Warehouse=Usa Im Printing The First Test With 40% Infill @ 0.2 Layer Height, Alternate Walls, Raft.
Statistics
Likes
1
Downloads
0