Doll House Dresser

Description

A Four Drawer Dresser, Modeled After The Discontinued Ikea Mandal Style Dresser, Modeled At **12:1** Scale. ## Printing The Drawers And The Face Plates For The Drawers Are Printed Separately, So No Supports Are Required; This Does, However, Require Gluing. I'Ve Tested This Print With **0.20Mm Layers** And **20% Infill**. * Print **1X** Of The _Small Drawer_ And _Small Drawer Face_ * Print **3X** Of The _Large Drawer_ And _Large Drawer Face_ * Print **1X** Of The _Dresser Main_ ## Assembling For Best Assembly Slide The Drawers Into Place Without Face Plates, And Set The Dresser On Its Back. Apply Glue To The Front Edge Of A Drawer, A Single Drawer At A Time, And Align And Press Face Plate Into Place. Repeat For All Four Drawers. ## Scaling I Haven'T Tested This Print At Anything Other Than **12:1** Scale, So Modifications Or Alterations May Be Needed To Print At Other Common Model Scales. This Is Especially True For The Rack And Runners Of The Drawers, Which May Shrink Down Below Printable Dimensions If Scaled Down To Far. For **18:1** Scale, Print At 66% Of Model Scale. For **24:1** Scale, Print At 50% Of Model Scale.

Statistics

Category

Tags