Gearstruder J4 - Dual Drive Extruder
Description
Minimal Extruder Housing For Use With The [Printrbot Gearhead Drive Gears](Https://Printrbot.Com/Shop/Gear-Head-Extruder-Gear-Set/), 1.75Mm Filament, And A Nema14 Motor. The Secondary Gear Is Inserted From The Side, And The Additional M3 Screws Or Setscrews Hold The Gear In Place And Adjust The Tension. It'S Designed To Use A Bowden Coupler From [Robotdigg](Https://Www.Robotdigg.Com/Product/348/Heavy-Duty-Push-Fit-Bowden-Connector-4-01). Make Sure The Setscrew Doesn'T Stick Out On The Primary Drive Gear, Especially If Using A Motor Without A D-Shaft. Filament Is [Emerald Green Petg From Atomic Filament](Https://Atomicfilament.Com/Collections/Petg-3D-Printer-Filament-Us-Made-With-Free-Shipping/Products/Ruby-Red-Translucent-Petg-Pro). There Is Also A [Nema17 Version](Https://Www.Thingiverse.Com/Thing:2772470) And Info About Several Other Dual Drive Bowden Extruders I'Ve Just Uploaded On [Thrinter.Com](Http://Thrinter.Com/2Wd-Dual-Drive-Extruder-Designs/)
Statistics
Likes
42
Downloads
0