5 Roll 120 Film Canister
Description
Holds 5 Rolls Of 120 Film, Wrapped Or Unwrapped (Though You May Need To Give It A Good Shake To Get Some Wrapped Rolls Out). Sturdy-Walled And Light-Tight, This Design **Should** Also Be Water Resistant, But Time Will Tell. You Will Need To Use O-Rings On The Printed Caps, Which Provide A Nice Seal. Specifically, You Will Need 1 Or 2 (I Use 2) Of The Following For Each Cap: 1 1/16" Od X 15/16" Id X 1/16" Sorry If O-Rings Are Only Available In Metric Sizes In Your Locale: I Don'T Know What The Appropriate Substitute Would Be. If You Want To Leave A Comment Letting Me Know What Works For You, I'Ll Be Happy To Update The Description. I'M Considering Supergluing The O-Rings To The Caps, As It'S Possible For Them To Pop Off If You'Re Not Careful. I May Provide An Updated Cap Design To Prevent This If Superglue Proves Ineffective. The "E" On The Canister Can Be Used To Indicate That A Given Roll Has Been Exposed. If The Pointer On The Cap Points To The "E" Side Of The Canister, The Film Is Exposed. (Or You Can Simply Ignore This.)
Statistics
Likes
34
Downloads
0