Air compressor part cooler
Description
This Part Is Designed For [Replicator 2X E3D-V6 Bowden Upgrade](Https://Www.Thingiverse.Com/Thing:1739097). I Got Tired Of Tiny Cooler Fans With Weak Air Flow And Bought Myself A 60L/Min Air Compressor (Designed For Fish Tanks) [This One](Https://Www.Ebay.Com.Au/Itm/Hopar-Aquarium-Fish-Tank-Pond-Oxygen-Air-Pump-Aqua-Blower-60L-Min-Eco-50W-/222223642202). It Is Relatively Quiet (Compared To Piston Compressors). The Part Is Meant To Be As Simple As Possible (I Failed), No Screws Required, The Air Ducts Just Slide To The Carriage From The Sides. I Use 10 Mm Od 8 Mm Id Pvc Hose. Print Two Air_Pump_Cooler_Mkbot2X.Stl On Side (One Should Be Mirrored) And An Air Tee (Or Just Print [Prepared Stl](Https://Www.Thingiverse.Com/Download:4639723). File Edges If Necessary And Assemble Everything As Shown On Photos =). Source Freecad Files Are Attached, But They Are Messy! The Air Flow Is Not Optimal Still, But Results Are Much Better Than With 40 Mm Cooling Fan!
Statistics
Likes
19
Downloads
0