6mm Standoff-Mounted SMA Antenna Bracket
Description
Howdy, Pilots! I Created An Antenna Mount To Go On My Martian Ii Frame And Thought I Would Share. My Reasons For Creating This Mount Were: 1) To Not Have My Sma/Antenna Fouling On The Top Plate Of My Martian, When This Bracket Is Mounted At The Top Of The Standoffs (As Pictured). The Other Design I Found That Fit These Fatter Standoffs, Projected The Antenna/Sma Up At A 45 Degree Angle, Which Fouled The Nut And Washers On The Top Plate. 2) To Have A Low Profile Antenna Mount Capable Of Mounting On Wider-Than-Stock 6Mm Standoffs. For My Frame Build I Used Orange 6Mm Diameter, 30Mm Tall Standoffs, As Pictured. These Are Slightly Wider Than The Stock Purple Martian And Alien Standoffs And Can Be Picked Up In A Variety Of Colours From Banggood. The Antenna Mounting Hole Is 6.35Mm In Diameter And Is A Snug Fit For The Sma Extension Cable I Used. It Will Also Fit Most Vtx'S Directly Should You Not Want To Use An Extension. The Mount Projects The Antenna/Sma Connector Out The Back Of The Quad, Parallel With The Top And Bottom Plates. A Flexible Rh/Lhcp Antenna Is Advised To Achieve Proper Signal Projection. Edit - 07/12/18: Added An Altered Mount At The Request Of A User. Has 30.5Mm Centres. Same Standoff Diameter Requirement (6Mm). Same Mount Dimensions.
Statistics
Likes
28
Downloads
0