Hypercube Evolution: *UPDATED* Ultimate X-Carriage/Hotend Mount
Description
Update: So I Determined That The Berd-Air System Really Was Just Too Noisy To Be Of Value, So I'Ve Since Ditched It. Additionally, I'Ve Upgraded To The Precision Piezo Orion, So I Redesigned The X-Carriage And Have Uploaded It Here As "X_Carriage_Nimble_Orion". It Doesn'T Have The Integral Mounts For The Berd-Air System, But It Does Have Space For Brass Inserts On The Outer Sides And The Bottom Front Of The Carriage, So It Would Be Trivial To Design Such An Addition. The Updated X-Carriage Uses The Bottom Half Of The Mount Supplied With The Pp Orion, And Replicates The Top Half Directly In The X-Carriage Itself. Parts Needed For The *Updated* Version (In Addition To The Standard Hevo Carriage/Nimble Mounting/Pp Orion Parts): Qty (2): M3 Hex Nuts Qty (6): M3 Brass Inserts (These Are For The Optional Accessory Mounting Options, This Does Not Include The Qty 3 Required For The Endstop Mounting & Carriage Attachment). *Old Information For The Pp Piezo 20+Berd-Air Setup*: For My Hevo Build, I Decided That I Wanted To Use The Best Components I Could Find: A Zesty Nimble Extruder, A Precision Piezo Z-Probe Sensor, An E3D V6 Gold Edition (The Hotend In The Picture Is Just A Stand-In Until My Filastruder Order Arrives!) And The Berd-Air Cooling System. I Needed To Design A New Carriage Plate To Be Able To Mount Everything To It, So Here It Is! Hardware That You'Ll Need For The *Original* Version (In Addition To The Standard Hevo Carriage Hardware): 4X M3 Square Nuts (Https://Www.Amazon.Com/100Pcs-Stainless-Steel-Square-Nuts/Dp/B018Jpzns6/Ref=Sr_1_3?Ie=Utf8&Qid=1517527748&Sr=8-3&Keywords=Square+M3+Nut) 2X M3 Hex Nuts 2X M3X10 Screws 2X M3X12 Screws
Statistics
Likes
30
Downloads
0