Barrel Wine Dispenser
Description
Note: Wine Bottle Standard Diameter Is 18.5Mm (+/-)0.5Mm. If Your Bottle In Not In Spec, A Good Seal Will Not Be Made. Video: Https://Gfycat.Com/Grayhilariousarkshell Pump Kit: Https://Www.Ebay.Com/Itm/Dc-6V-9V-Mini-Air-Pump-Motor-Kits-For-Homemade-Dispenser-Machine-Fountain-Drink/182935863051?Sspagename=Strk%3Amebidx%3Ait&_Trksid=P2057872.M2749.L2649 6Mm X 4Mm Stainless Capillary Tube: Https://Www.Ebay.Com/Itm/1Pcs-304-Stainless-Steel-Capillary-Tube-Pipe-Od-6Mm-X-Id-4Mm-Length-250Mm/192227021034?Sspagename=Strk%3Amebidx%3Ait&_Trksid=P2057872.M2749.L2649 P14 O-Ring: Harbor Freight Or Online (Optional; See Edit 2) M3X12Mm Bolts Or Similar Sizes Screws: Pre-Drill And Tap For Bolts Use Brake Line Tubing Bender To Bend Capillary Tube 135º Use Epoxy To Glue Locating Pins And Halves Together. Use Silicone Around Tubes Going Into The Wine Bottle Clean By Running Hot Water Through Tube When Finished Edit: Added Optional Wine Stopper Model. This Stopper Can Double As A Bottle Diameter Test. Use It To Make Sure The Barrel Dispenser Will Fit. Edit 2: Added A Taper Seal For Printing With Flexible Filament. This Taper Seal Will Fit A Wider Tolerance Of Wine Bottles Than The O-Ring Can Handle. It Can Also Be Put On The Stopper.
Statistics
Likes
148
Downloads
0