2020 mounts
Description
Various Sliding 2020 Mounts. - Ramps/2560 - Print As Per Radds Description - The Bolt Hole That Isnt A Hole But Rather A Spike May Be Too Large. I Forget If I Fixed The Stl Or Just Cut It Off Mine. - Radds/Due - Printing Horizontally (As The Stl Is Supplied) With Supports Inside The 2020 Part Is Probably Better Than Printing Upright Without Supports. - 60Xx Fan - Print Vertically Without Supports Will Work, But Supports On The 2020 Section Protrusions Will Help. - Consider Printing The Grille Twice, To Protect The Fan From The Boards Connector Wires. Optional. All Mounts Should Lightly Grip The 2020 With Only Friction. M4X10 Bolts And T-Nuts Are Used To Lock The Mount In Position. Wingnut Or Other Finger-Adjustable Nut Heads Recommended. Printed: Pla, 200C, 60C Bed, 0.4Mm Nozzle, 0.3Mm Layers, 2.0Mm Walls/Top/Bottom, 20% Infill But Almost None Is Generated With 2Mm Walls. I Prefer These Mounts To Be Solid.
Statistics
Likes
7
Downloads
0