Rainstick Baby Rattle
Description
This Is A Baby Rattle With A Built-In Rainstick! There Are Two Versions: One With A Cutout That Will Fit My Remixed [Baby Dragon Head](Https://Www.Thingiverse.Com/Thing:2796325), And Another With Just A 35Mm Diameter Hole So You Can Superglue Your Own Design On! There'S Also A 3Mm Hole In The Top So You Can Add Your Own Beads/Rice/Bb'S/Whatever - Spheres Work Better (I Went To Ac Moore And Got A $3 Package Of Metal Jewelry Beads). The Piece Is 145Mm Tall And Is Designed Hollow, So It Prints _With Infill_ (Mostly For The Spherical Pommel) And _With Supports_ __Only On The Buildplate__ (For The Flat Overhang Of The Head) - However, Be Careful About Your Support Density And Raft Settings Here, Unless You'Re Prepared To Spend 30 Minutes Digging Out A Sealed Plastic Cap (Admittedly Pretty Fun. Bring Pliers And A Small Knife!). I Used .8Mm Layers, Thick Walls And Printed Nice And Slow - Overnight Print. You Can Probably Get It Going Much Faster Without Sacrificing Quality. I Would Suggest Using 3-5 Walls Though, So The Helix In The Middle Prints Sturdily. For My Project I Threw It Into Tinkercad And Used The Flat Panels Around The Collar For Roman Numerals. Let Me Know If You Would Like This Remixed For You Personally.
Statistics
Likes
20
Downloads
0