Atari 400 Case for the Raspberry PI 2 Model B
Description
The Data (Coordinates, Measures Etc.) Have Been Taken From The Model Mini Atari 400, Www.Thingiverse.Com/Thing:195529. In This Model A Pdf-File With A Picture Of The Keyboard And The Atari © Logo Can Be Found. Later After Printing This File Is Used To Make The Keyboard Foil Of The Computer. I Have Also Added It To The Data Files Of This Model. My Thanks Go To Rabbitengineering For The Model Of The Atari 400 ©. To Make It Easier When Using This Case With A Different Type Of Raspberry I Added Also The Openscad Files For Download, So It Is Easier To Modify The Design For A Different Type Or Size Of Raspberry Pi Or Any Other Small Computer Which Would Fit Into The Case. To Show The Status Of The Power Supply A 3Mm Led Was Also Added At A Similar Position As In The Original Atari © Computer. Partslist ---------- * A Raspberry Pi 2 Model B * A Led In Your Favourite Colour With 3 Mm * A Resistor Which Fits To The Type Of Led (Led With 10Ma Connected To 5V, Resistor Value Around 330 Ohms) * A Cable With A Connector To Connect The Led And The Resistor With The Pin Header Of The Raspberry. I Used A 2 Wire Cable With Connector From An Arduino Kit. * Some Wire And Shrinking Tube
Statistics
Likes
38
Downloads
0