c270 Prusa Mk3 Camera mount

Description

Updated 3-22-2019 Made A Beefier Version Of The Mount. Print Out The "Beefy" Versions. Your Printer Will Need To Be Able To Print With Tight Tolerances For The Thread To Work. Beefy C270 Bracket.Stl Beefy Bed Mount.Stl Beefy Collar.Stl Beefy Screw X2.Stl ___________________________ Updated 7-26-2018 Been Playing Around With The Octolapse Plugin And Wanted A Higher Vantage Point For Timelapses. I Extended The Bold And Collar To Give You A Higher View. Rest Of The Parts Are The Same. ___________________________ The C270 Camera Mount Is Attached To The Camera Using It'S Own Hinge Pin. The Dual Diameter Bolt Fits Through The Sliding Mount. To Remove The Original Weighted Logitech Mount From The Camera, Use A Thin Knife To Remove The Covers Over The Ends Of The Hinge Pin. You Should Then Be Able To Use A Screwdriver To Remove The Pin. You May Need To Push The Pin Out With A Thin Screwdriver Or Similar Tool. The Printed Camera Mount Will Be Loose On The Hinge. Use A Small (M3?) Metal Washer At One End Of The Hinge Pin, And A Very Small Rubber Washer At The Other End Of The Hinge Pin. You Should Print The Bed Mount With Either Abs Or Petg Since It Is Touching The Build Plate. Pla Will Not Work For This Part, Pla Will Work For The Rest Of The Parts Though.

Statistics

Category

Tags