Very simple PCB vise
Description
The Vise Consists Only From 3 Different 3D Printed Parts And 2 M6 Threaded Rods With 6 Nuts – It Is Very Easy To Make One. Four Of The Six Nuts Have Additionally Printed Knobs That Tightly Fit On Them. The Vise Has V-Shaped Grooves Compatible With Pcb,S Up To 2.5 Mm Thick. Pcb Can Be Mounted In 4 Planes (Tilted, Vertical, Horizontal). In Addition, There Are Holes For Cylindrical Neodymium Magnets 10 X 4 Mm At The Bottom – Also For “Press-Fit”. This Vise Was Designed In That Way To Be Relatively Easy To Print On A 3D Printer. It Is Quite Small – Only 75 Mm In Width And 32 Mm In Height So It Doesn’T Take Much Valuable Space In Your Workshop. You Need To Print: 1X Pcb_Holder_-_Jaw.Stl 1X Pcb_Holder_-_Jaw_Base.Stl 4X Pcb_Holder_-_Thumb_Screw.Stl Recommended Printing Settings: Layer Height: 0.2 Mm Printing Speed: 40-60 Mm/S Filament: Abs/Asa Infill: Honeycomb 30% Or More Outlines: 2 Or More Top/Bottom 100% Layers: 3 Or More Support: Yes - Inside The Nut Pockets Nozzle: 0.4 Mm Description Of This Project On My Web Page: Https://Bytechlab.Com/2018/02/Very-Simple-Pcb-Vise/ Some Images And Renders:    
Statistics
Likes
69
Downloads
0