rc aircraft ceiling mount
Description
A Ceiling Mount For Models That Allows Them To Be Lowered To The Ground Without The Use Of A Ladder. Incorporates A Ratchet System For Easy Lowering And Raising. Test With At Least 3 Times The Weight Planned To Mount From It For 24 Hours At Least To Make Sure It Doesn'T Come Loose Use Complete Stl For Guide On Assembly Attach A Stretchy Spring To The Spring Pin And The Ratchet Hook To Ensure It Doesn'T Slip To Print (For One Bend And One Ratchet): Print Axle Support 4 Times Print Axle Once Print Lower Body 4 Times Upper Body Twice Ratchet And Axle Once Ratchet Hook Once Spring Pin Once To Set Up Assemble Parts And Attach A Piece Of String Completely Round The Ratchet Axle And Glue Solidly Screw The Ratchet On The Wall (With A Washer) Where You Want It. Screw The Bend On The Corner Of The Ceiling And Run String Through Screw A Loop Screw Directly Above Where You Want The Model To Hang And Run String Through Attach String Securely Onto The Model When Its On The Floor And So It Balances Winch Model Up.
Statistics
Likes
0
Downloads
0